4 or 8 Way Fiber Optic Return Path Receiver (low optical input)
The MX RR-LI transforms return optical signals to RF signal output. The standard 1U chassis integrates 4 or 8 independent receiver modules, it can receive up to 256 return optical signals from burst mode mini-nodes or services for 256 RFoG optical network units (ONU)-Mini-Nodes.
- General Details
The MX RR-LI transforms return optical signals to RF signal output. The standard 1U chassis integrates 4 or 8 independent receiver modules, it can receive up to 256 return optical signals from burst mode mini-nodes or services for 256 RFoG optical network units (ONU)-Mini-Nodes.
High sensitivity for low optical input (to -32dBm) , provides flexibility for your optical link design. A front panel LCD displays the receiver’s operating status and parameters for ease of local operation and monitoring, in additional the optional SNMP network management interface comply with SCTE-HMS and IEC standards.
- Example Application
- Model Selection
- MX4RR-LI – 4 Way Fiber Optic Return Path Receiver (low optical input)
- MX8RR-LI – 8 Way Fiber Optic Return Path Receiver (low optical input)
- Specifications
OPTICAL
- Wavelength: 1260~1620 (nm)
- Input Power Range: -16 to -23 (dBm) * Optimal recommended range, receiver will operate to -32 dBm
- Return Loss: >45.0 (dB)
- Power Instruction Precision: 5%
RF
- RF Passband: 5 MHz up to 204 MHz (5~204 MHz)
- Output Level: >= +30 to +60 (dBmV) when Input optical power is -20 dBm, ATT is 0dB, 4% OMI
- Flatness: <=+-0.75 (dB)
- Output Return Loss: >=16 (dB)
- Output Test Point: -20+-0.75 (dB)
- Isolation Between Channels: >-70 (dB)
- CNR: >=51 (dBc)
- CSO: >=60 (dBc)
- CTB: >=65 (dBc)
USER INTERFACE
- InGaAs PIN
USER INTERFACE
- Optical Connector: SC / APC
- Optical Fiber Type: Single-Mode Fiber
- RF Test Port Type: Metric F Head
- RF Output Port Type: Metric F Head
- Power Interface: AC 110V (-48 VDC optional)
GENERAL
- Dimension (W)x(H)x(L): 184x43x432 (mm)
- Power Supply: AC 60Hz 110/220V 30VA
- Order Inquiry
- Documents
- Related Products
ONU RFoG Mini Node
The Maxcom MX700AC series ONU mini nodes offer enhanced features such as AGC (Automatic Gain Control), or PON ports to support GPON, EPON, xPON services. Maxcom offers highly reliable RFoG solutions.
Mini Fiber Node – High Output RF Receiver & Return Path Transmitter
The MX-ON50 Series Optical Nodes are designed for maximum versatility and performance. They are ideal for fiber-to-the-building applications.
Return Path Transmitter 5~204 MHz RF over Fiber
The MX-TR1x10-R5-204 is a one way return path optical transmitter. Primarily used to transmit return RF signals (5~204MHz) over fiber.
Mini Fiber Optic Return Path Receiver
The MX 1RR-LI transforms return optical signals to RF signal. The standard mini receiver module can receive return optical signals from burst mode mini-nodes or RFoG optical network units (ONU)-Mini-Nodes.
WDM Fiber Optic Multiplexer (Wave Division Multiplexer)
The MX WDM Fiber Optic Wavelength Division Multiplexer, enables 1310nm and 1550nm wavelengths to be transmitted simultaneously on the same fiber optic cable. The direction of the optical signals can be in the same direction or opposite directions.