| |
| | |
|
|
MX OLT, Optical Ethernet Swith and CATV Optical Signal Splitter/Multiplexer |
|
| |
| | |
| | |
| |
|
| Optical Ethernet Swith and CATV Optical Signal Splitter/Multiplexer
| |
| The MX-OLT (Optical Line Termial) is a 24+2G managed Layer 2 optical Ethernet switch with integrated CATV optical signal splitting and multiplexing functions. The MX-OLT is an ideal solution for ‘triple-play’ services (data, voice and CATV) over single-mode fiber for fiber-to-the-home (FTTH) or fiber-to-the-building (FTTB) applications.
The MX-OLT offers up to 24 100Base-BX10 ports which are multiplexed with CATV optical signals and are connected to the MX-ONU (Optical Network Unit) in the user’s premises, two 10/100/1000Base-TX or optional SFP 1000Base-X ports for fast connection to the core data networks, and one CATV optical signal input port. Our optical network management solutions allow administrators to easily configure features, monitor performance, and troubleshoot the switches using a standard Web browser and Simple Network Management Protocol (SNMP)-based network management platforms.
| |
|
|
|
| |
|
|
|
 | |  |
|
|
MX OLT |
|
MAXCOM OPTICAL LINE TERMINAL UNIT |
|
| |
 | |  |
| |
| |
| |
|
|
|
|
| |
| |
| | |
|
|
|
|
- One 100Base-FX single fiber network port with CATV overlay
- Four 10/100Base-TX Half/Full duplex switch ports
- 2048 MAC address table (4-way hashing)
- Two queues for QOS (1:2 or 1:4 or 1:8 or 1:16)
- Port-based, 802.1p and IP TOS priority
- Store & forward architecture and performs forwarding and filtering at non-blocking full wire speed
- An aging function and 802.3x flow control for full duplex and a backpressure function for half duplex
- Packet lengths up to 1522 bytes
- Congestion Flow Control (HOL)
- Port-based VLAN and adjustable VLAN to support up to 32 VLAN groups
- Broadcast storm filter
- Wide 40 MHz ~ 870 MHz bandwidth supports CATV analog channels or a combination of analog and digital channels including HDTV broadcast
- Excellent RF frequency and distortion characteristics for high linearity
- Internal proprietary impedance match circuitry with one 75Ω coaxial-cable output port
- High sensitivity of 75 dBuV RF output at –3dBm optical input.
|
|
| |
| | |
| |
| |
| |
| |
| | |
|
|
|
|
- In Band: SNMP, Web-based HTTP and Telnet.
- Out of Band: RS-232 Console.
|
|
| |
| | |
| |
| |
| | |
|
|
Network Protocol and Standards |
|
|
|
| |
| | |
| |
| |
| | |
|
|
|
|
IEEE:
802.3, 802.3u, 802.3z, 802.3ab, 802.3ah, 802.1d, 802.1p, 802.1q, 802.1v, 802.3ad, 802.3x
IEFT:
RFC1157 SNMP, RFC 1112/2236 IGMP, RFC854 Telnet, RFC 1123/1493/1643 MIB |
|
| |
| | |
| |
| |
| |
| |
| | |
|
|
|
|
- Gigabit ports: two 10/100/1000Base-TX RJ45 ports or two optional SFP 1000Base-X LC ports.
- 100Mbps ports: up to 24 100Base-BX10 FC ports multiplexed CATV optical signal.
- CATV optical signal input port: light power>12dbm, RF bandwidth 45MHz-860MHz.
|
|
| |
| | |
| |
| |
| | |
|
|
Optical Interface Options |
|
|
|
| |
| | |
| |
| |
| | |
|
|
|
|
1000Base-X
- Dual multimode fiber(50/125μm), single wavelength 850nm, dual LC connectors, operating distance 550m.
- Dual multimode fiber(62.5/125μm), single wavelength 850nm, dual LC connectors, operating distance 275m.
- Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual LC connectors, operating distance 15/40km.
100Base-BX10
- Single single-mode fiber, dual wavelength 1550nm for CATV and 1310nm for data, FC/APC connector, operating distance 15km.
|
|
| |
| | |
| |
| |
| |
| |
| | |
|
|
|
|
- AC90~264V/1.2A max, 50/60Hz, or
- DC18~36V/2A or
- DC36~72V/1.5A.
- Power Consumption: 45W
|
|
| |
| | |
| |
| |
| | |
|
|
Physical and Environmental |
|
|
|
| |
| | |
| |
| |
| | |
|
|
|
|
- Weight: 9Kg
- Operating temperature: 0℃ ~ 50℃
- Storage temperature: -25℃ ~ 55℃
- Humidity: 5% ~ 95% RH Non-condensing.
|
|
| |
| | |
| |
| | |
